[*감사합니다*]

To: <questions@xxxxxxxxxxxxxx>

Subject: [*감사합니다*]

From: "lee jusang" <jslee21@xxxxxxxxxxx>

Date: Tue, 2 Nov 1999 03:56:32 +0900

Content-type: multipart/alternative;boundary="----=_NextPart_000_0005_01BF24E6.404672E0"

Reply-to: questions@xxxxxxxxxxxxxx

Sender: owner-questions@xxxxxxxxxxxxxx

Park, JongHwan 님 정말 빠른 답변 감사드립니다.

아주 이상한 문제군요... FreeBSD에... 아니면 저희 시스템의 문제이거나...

컴팩 프로라이언트 800입니다. 이것 구입하실 분은 이부분에 조심하셔야 할듯합니다.

다음은 www.freebsd.org 에서 본 FAQ입니다.

다른분들에게도 참고가 되시기를...

Q: I have 128 MB of RAM but the system only uses 64 MB.

A: Due to the manner in which FreeBSD gets the memory size from the BIOS, it can only detect 16 bits worth of Kbytes in size (65535 Kbytes = 64MB) (or less... some BIOSes peg the memory size to 16M). If you have more than 64MB, FreeBSD will attempt to detect it; however, the attempt may fail.

To work around this problem, you need to use the kernel option specified below. There is a way to get complete memory information from the BIOS, but we don't have room in the bootblocks to do it. Someday when lack of room in the bootblocks is fixed, we'll use the extended BIOS functions to get the full memory information...but for now we're stuck with the kernel option.

options "MAXMEM=<n>"

Where n is your memory in Kilobytes. For a 128 MB machine, you'd want to use 131072.

빨리 해봐야 겠습니다. 잘 되기를 바라면서...