Software, Support, Documentation
|
|
News,
Internal,
Projects,
Home Software, Support, Documentation |
FreeBSD4.1-Stable에서 FreeBSD4.1-Release로 make world후 문제발생.(시스템이
멈춰버립니다.)
2000년 8월 30일 오후경에 두대의 프비박스를 make world 하였습니다.
한대는 KIDC에 있는 거고 또 한대는 로컬에서 쓰는 놈입니다.
그런데 make world후에 kernel을 전에 설정한 커널 파일을 이용해서 config -r
KERNEL 해주고
make depend all install 하고..reboot를 하면 -_-;
맨처음에는 나옵니다.
한 1분정도?
그 후엔 쉘이 죽습니다.
네트웍도 죽습니다.
다만 살아 있는 건 약간의 핑과...Scroll Lock누르고 화면 움직이는 것,
alt-F1,F2,F3,F4로 다른 화면 전환.
그러나 키보드 입력은 받지 않습니다.
ctrl+alt+del 또한 먹히지 않습니다.
GENERIC에서의 저의 컴퓨터의 dmesg와 제가 설정한 커널설정을 올리겠습니다.
무엇이 잘못 되었는지 누가 좀 도와주세요..T.T
===============================kernel.GENERIC에서의
dmesg============================
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-RELEASE #0: Fri Jul 28 14:30:31 GMT 2000
jkh@ref4.freebsd.org:/usr/src/sys/compile/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium II/Pentium II Xeon/Celeron (334.09-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x660 Stepping = 0
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,
PAT,PSE36,MMX,FXSR>
real memory = 201326592 (196608K bytes)
avail memory = 191557632 (187068K bytes)
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on
pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 11
at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: port 1 power on failed, IOERROR
uhub0: port 2 power on failed, IOERROR
chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at
device 7.3 on pci0
pci0: <Cirrus Logic GD5465 SVGA controller> at 8.0 irq 10
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xe400-0xe47f mem
0xd1010000-0xd101007f irq 12 at device 10.0 on pci0
xl0: Ethernet address: 00:01:02:7d:a6:35
miibus0: <MII bus> on xl0
xlphy0: <3Com internal media interface> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
plip0: <PLIP network interface> on ppbus0
ata1-slave: ata_command: timeout waiting for intr
ata1-slave: identify failed
ad0: 19464MB <SAMSUNG SV2044D> [39546/16/63] at ata0-master using UDMA33
ad1: 19464MB <SAMSUNG SV2044D> [39546/16/63] at ata0-slave using UDMA33
acd0: CDROM <CRD-8400C> at ata1-master using PIO4
Mounting root from ufs:ad0s1a
============================================================================
===============
========================제가 설정한 Kernel
config===============================================
machine i386
cpu I686_CPU
ident FILESERVER
maxusers 512
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep
this!]
options SOFTUPDATES #Enable FFS soft updates support
options MSDOSFS #MSDOS Filesystem
options CD9660 #ISO 9660 Filesystem
options CD9660_ROOT #CD-ROM usable as root, CD9660
required
options PROCFS #Process filesystem
options COMPAT_43 #Compatible with BSD 4.3 [KEEP
THIS!]
options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options USERCONFIG #boot -c editor
options VISUAL_USERCONFIG #visual boot -c editor
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extensions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
device isa
device eisa
device pci
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
device fd1 at fdc0 drive 1
device ata0 at isa? port IO_WD1 irq 14
device ata1 at isa? port IO_WD2 irq 15
device ata
device atadisk # ATA disk drives
device atapicd # ATAPI CDROM drives
device atapifd # ATAPI floppy drives
device atapist # ATAPI tape drives
options ATA_STATIC_ID #Static device numbering
#options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1 flags 0x1
device psm0 at atkbdc? irq 12
device vga0 at isa?
pseudo-device splash
device sc0 at isa? flags 0x100
device npx0 at nexus? port IO_NPX irq 13
device apm0 at nexus? disable flags 0x20 # Advanced Power
Management
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
device plip # TCP/IP over parallel
device ppi # Parallel port interface device
#device vpo # Requires scbus and da
device miibus # MII bus support
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
pseudo-device sl 1 # Kernel SLIP
pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device md # Memory "disks"
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
pseudo-device bpf #Berkeley packet filter
# USB support
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device usb # USB Bus (required)
device ugen # Generic
device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
======================위에서 USB는 빼도 문제는 마찬가지
였습니다.======================================
--
To Unsubscribe: send mail to majordomo@kr.FreeBSD.org
with "unsubscribe questions" in the BODY of the message
|
Copyright © 1998-2005 Korea FreeBSD Users Group. All rights reserved. webmaster at kr.FreeBSD.org $Date: 2002/03/26 13:28:55 $ |
|