[KFUG] pccard 인식 실패

["Younggoo. Hong" <freedog@xxxxxxxx>]

삼성에서 만든 구형 노트북에 FreeBSD 5.2 를 설치했습니다.
ethernet pccard 한개는 정상적으로 인식해 제대로 동작하는데, 한개를 더
꽃으면 다음과 같은 오류 메시지를 출력하면서 인식을 하지 못 합니다.

pccard: card inserted, slot 1
Feb 28 00:26:32 yworldg pccardd[153]: Card "PCMCIA"("Ethernet Card") [] []
match
ed "PCMCIA" ("Ethernet Card") [(null)] [(null)]
Feb 28 00:26:32 yworldg pccardd[153]: No free configuration for card PCMCIA

kernel 설정파일과 dmesg 를 첨부합니다.
함 봐 주심 감사하겠습니다.

-------------------------------------------------
Younggoo Hong
Web Development Team/Assistant Manager
Plenus Entertainment Inc. Netmarble Business Unit

28F, StarTower, 737
Yeoksam-dong, Kangname-gu
SEOUL, Republic of KOREA

secrete@xxxxxxxxxxxx
http://www.plenus.co.kr
+82 2 2193-8941 (office phone)
+82 2 2193-8701 (office fax)
+82 16 355-0915 (mobile phone)

Attachment: SSENS.dat
Description: Binary data

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.2-RELEASE #1: Thu Feb 26 00:07:37 KST 2004
    root@yworldg:/usr/src/sys/i386/compile/SSENS
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0729000.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium/P54C (90.00-MHz 586-class CPU)
  Origin = "GenuineIntel"  Id = 0x525  Stepping = 5
  Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory  = 33554432 (32 MB)
avail memory = 27365376 (26 MB)
Intel Pentium detected, installing workaround for F00F bug
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcibios: BIOS version 2.10
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <display, VGA> at device 3.0 (no driver attached)
pci0: <bridge, PCI-unknown> at device 5.0 (no driver attached)
isa0: <ISA bus> on motherboard
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
pmtimer0 on isa0
ata0 at port 0x3f6,0x1f0-0x1f7 irq 14 on isa0
ata0: [MPSAFE]
ata1 at port 0x376,0x170-0x177 irq 15 on isa0
ata1: [MPSAFE]
atkbdc0: <Keyboard controller (i8042)> at port 0x64,0x60 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0: <Vadem 468> at port 0x3e0 iomem 0xd0000 on isa0
pcic0: Polling mode
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pccard1: <PC Card 16-bit bus (classic)> on pcic0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
unknown: <PNP0501> can't assign resources (port)
unknown: <PNP0401> can't assign resources (port)
unknown: <PNP0600> can't assign resources (port)
unknown: <PNP0700> can't assign resources (port)
unknown: <IBM Enhanced (101/102-key) KC> can't assign resources (port)
Timecounter "TSC" frequency 90001426 Hz quality 800
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc1577360
ad0: 773MB <IBM-DPRA-2810> [1572/16/63] at ata0-master PIO3
Mounting root from ufs:/dev/ad0s1a
pccard: card inserted, slot 0
pccard: card inserted, slot 1
ed1 at port 0x300-0x31f irq 5 slot 0 on pccard0
ed1: address 18:08:00:00:22:22, type NE2000 (16 bit) 

_______________________________________________
한국 FreeBSD 사용자 그룹(KFUG) questions 메일링 리스트
questions at kr.FreeBSD.org
http://www.kr.FreeBSD.org/mailman/listinfo/questions