Korea FreeBSD Users Group News, Internal, Projects, Home
Software, Support, Documentation

Re: [KFUG] dmesg


[ 날짜순 색인 ] [ 댓글순 색인 ] [ 최상위 색인] [ 검색]

[이전 글] [다음 글] [이전 댓글] [다음 댓글] 

Wed, Dec 08, 2004 at 02:23:06PM +0900
Song Jeong il <jisong@xxxxxxxxxxxx> wrote:

> 새로장비를 설치후 dmesg를 보니 아래와 같은 메세지가 있습니다
> 
> syncing disks...
> .
> .
> .
> syncing disks...
> 
> 제 경험으로는 이런류의 메세지들이 보이다 하드가 크랙된적이 몇번 있는데 
> 장비를 새로 받아야 할까요?
> 아래는 dmesg내용입니다.
> 
>  Hyperthreading: 2 logical CPUs
> real memory  = 2146959360 (2096640K bytes)
> avail memory = 2085687296 (2036804K bytes)
> Preloaded elf kernel "kernel" at 0xc0551000.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 29 entries at 0xc00fddf0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
> pci2: <PCI bus> on pcib2
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
> pci3: <PCI bus> on pcib3
> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
> pci4: <PCI bus> on pcib4
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
> pci5: <PCI bus> on pcib5
> aac0: <Adaptec SCSI RAID 2120S> mem 0xf0000000-0xf7ffffff irq 11 at device 
> 1.0 on pci5
> aac0: Unknown processor 100MHz, 112MB cache memory, optional battery not 
> installed
> aac0: Kernel 4.1-0, Build 7244, S/N bb88f3
> aac0: Supported 
> Options=11d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
> pci6: <PCI bus> on pcib6
> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 
> 0xe8300000-0xe8300fff irq 11 at device 2.0 on pci6
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem 
> 0xe8301000-0xe8301fff irq 11 at device 2.1 on pci6
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f 
> irq 11 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f 
> irq 10 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f 
> irq 5 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
> pci7: <PCI bus> on pcib7
> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem 
> 0xe8420000-0xe843ffff,0xe8401000-0xe8401fff irq 11 at device 2.0 on pci7
> fxp0: Ethernet address 00:30:48:22:e6:ab
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: <Intel 82550 Pro/100 Ethernet> port 0x4440-0x447f mem 
> 0xe8440000-0xe845ffff,0xe8402000-0xe8402fff irq 5 at device 3.0 on pci7
> fxp1: Ethernet address 00:30:48:22:e6:ac
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port 
> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
> 0xe8000000-0xe80003ff irq 0 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
> orm0: <Option ROMs> at iomem 
> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff 
> on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: parallel port not found.
> acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> aacd0: <RAID 5> on aac0
> aacd0: 139948MB (286614016 sectors)
> aacd1: <Volume> on aac0
> aacd1: 34970MB (71619584 sectors)
> Mounting root from ufs:/dev/aacd0s1a
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
> 
> syncing disks... 1
> done
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 4.10-RELEASE #0: Tue May 25 22:52:21 GMT 2004
>    root@xxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/BOOTMFS
> Timecounter "i8254"  frequency 1193182 Hz
> Timecounter "TSC"  frequency 2395920592 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2395.92-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
> real memory  = 2146959360 (2096640K bytes)
> config> intro
> \^[[m\^[[H\^[[J\^[[3;26H\^[[m\^[[1m\^[[m\^[[6;11H\^[[m\^[[7m\^[[m\^[[7;11H\^[[m\^[[8;11H\^[[m\^[[11;3H\^[[m\^[[12;3H\^[[m\^[[13;3H\^[[m\^[[15;3H\^[[m\^[[16;3H\^[[m\^[[18;3H\^[[m\^[[19;3H\^[[m\^[[21;3H\^[[m\^[[7m\^[[m\^[[22;3H\^[[m\^[[1;1H\^[[m\^[[H\^[[Javail 
> memory = 2083438592 (2034608K bytes)
> Preloaded elf kernel "kernel" at 0xc0829000.
> Preloaded mfs_root "/mfsroot" at 0xc0829084.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> md0: Preloaded image </mfsroot> 4423680 bytes at 0xc03ef3d4
> md1: Malloc disk
> Using $PIR table, 29 entries at 0xc00fddf0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
> pci2: <PCI bus> on pcib2
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
> pci3: <PCI bus> on pcib3
> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
> pci4: <PCI bus> on pcib4
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
> pci5: <PCI bus> on pcib5
> pci5: <unknown card> (vendor=0x9005, dev=0x0285) at 1.0 irq 11
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
> pci6: <PCI bus> on pcib6
> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 
> 0xe8300000-0xe8300fff irq 11 at device 2.0 on pci6
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem 
> 0xe8301000-0xe8301fff irq 11 at device 2.1 on pci6
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f 
> irq 11 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f 
> irq 10 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f 
> irq 5 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
> pci7: <PCI bus> on pcib7
> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem 
> 0xe8420000-0xe843ffff,0xe8401000-0xe8401fff irq 11 at device 2.0 on pci7
> fxp0: Ethernet address 00:30:48:22:e6:ab
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: <Intel 82550 Pro/100 Ethernet> port 0x4440-0x447f mem 
> 0xe8440000-0xe845ffff,0xe8402000-0xe8402fff irq 5 at device 3.0 on pci7
> fxp1: Ethernet address 00:30:48:22:e6:ac
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port 
> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
> 0xe8000000-0xe80003ff irq 0 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
> orm0: <Option ROMs> at iomem 
> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff 
> on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: parallel port not found.
> acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> Mounting root from ufs:/dev/md0c
> aac0: <Adaptec SCSI RAID 2120S> mem 0xf0000000-0xf7ffffff irq 11 at device 
> 1.0 on pci5
> aac0: Unknown processor 100MHz, 112MB cache memory, optional battery not 
> installed
> aac0: Kernel 4.1-0, Build 7244, S/N bb88f3
> aac0: Supported 
> Options=11d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
> aacp0: <SCSI Passthrough Bus> on aac0
> aacd0: <Volume> on aac0
> aacd0: 34970MB (71619584 sectors)
> aacd1: <RAID 5> on aac0
> aacd1: 139948MB (286614016 sectors)
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: parallel port not found.
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
> 
> syncing disks...
> done
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 4.10-RELEASE #0: Tue May 25 22:47:12 GMT 2004
>    root@xxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2395.92-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
> real memory  = 2146959360 (2096640K bytes)
> avail memory = 2085687296 (2036804K bytes)
> Preloaded elf kernel "kernel" at 0xc0551000.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 29 entries at 0xc00fddf0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
> pci2: <PCI bus> on pcib2
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
> pci3: <PCI bus> on pcib3
> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
> pci4: <PCI bus> on pcib4
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
> pci5: <PCI bus> on pcib5
> aac0: <Adaptec SCSI RAID 2120S> mem 0xf0000000-0xf7ffffff irq 11 at device 
> 1.0 on pci5
> aac0: Unknown processor 100MHz, 112MB cache memory, optional battery not 
> installed
> aac0: Kernel 4.1-0, Build 7244, S/N bb88f3
> aac0: Supported 
> Options=11d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
> pci6: <PCI bus> on pcib6
> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 
> 0xe8300000-0xe8300fff irq 11 at device 2.0 on pci6
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem 
> 0xe8301000-0xe8301fff irq 11 at device 2.1 on pci6
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f 
> irq 11 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f 
> irq 10 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f 
> irq 5 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
> pci7: <PCI bus> on pcib7
> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 11
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem 
> 0xe8420000-0xe843ffff,0xe8401000-0xe8401fff irq 11 at device 2.0 on pci7
> fxp0: Ethernet address 00:30:48:22:e6:ab
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: <Intel 82550 Pro/100 Ethernet> port 0x4440-0x447f mem 
> 0xe8440000-0xe845ffff,0xe8402000-0xe8402fff irq 5 at device 3.0 on pci7
> fxp1: Ethernet address 00:30:48:22:e6:ac
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port 
> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
> 0xe8000000-0xe80003ff irq 0 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
> orm0: <Option ROMs> at iomem 
> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff 
> on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: parallel port not found.
> acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> aacd0: <Volume> on aac0
> aacd0: 34970MB (71619584 sectors)
> aacd1: <RAID 5> on aac0
> aacd1: 139948MB (286614016 sectors)
> Mounting root from ufs:/dev/aacd0s1a
> Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
> Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
> Waiting (max 60 seconds) for system process `syncer' to stop...stopped
> 
> syncing disks... 112 17
> done
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>        The Regents of the University of California. All rights reserved.
> FreeBSD 4.10-RELEASE-p5 #0: Wed Dec  8 14:21:59 KST 2004
>    root@xxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/howdeal
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Intel(R) Xeon(TM) CPU 2.40GHz (2395.92-MHz 686-class CPU)
>  Origin = "GenuineIntel"  Id = 0xf27  Stepping = 7
>  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>  Hyperthreading: 2 logical CPUs
> real memory  = 2146959360 (2096640K bytes)
> avail memory = 2085609472 (2036728K bytes)
> Programming 24 pins in IOAPIC #0
> IOAPIC #0 intpin 2 -> irq 0
> Programming 24 pins in IOAPIC #1
> Programming 24 pins in IOAPIC #2
> Programming 24 pins in IOAPIC #3
> Programming 24 pins in IOAPIC #4
> FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
> cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
> cpu1 (AP):  apic id:  6, version: 0x00050014, at 0xfee00000
> cpu2 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
> cpu3 (AP):  apic id:  7, version: 0x00050014, at 0xfee00000
> io0 (APIC): apic id:  2, version: 0x00178020, at 0xfec00000
> io1 (APIC): apic id:  3, version: 0x00178020, at 0xfec80000
> io2 (APIC): apic id:  4, version: 0x00178020, at 0xfec80400
> io3 (APIC): apic id:  5, version: 0x00178020, at 0xfec81000
> io4 (APIC): apic id:  8, version: 0x00178020, at 0xfec81400
> Preloaded elf kernel "kernel" at 0xc0561000.
> Warning: Pentium 4 CPU: PSE disabled
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 29 entries at 0xc00fddf0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> IOAPIC #0 intpin 16 -> irq 2
> IOAPIC #0 intpin 19 -> irq 10
> IOAPIC #0 intpin 18 -> irq 11
> pci0: <PCI bus> on pcib0
> pci0: <unknown card> (vendor=0x8086, dev=0x2541) at 0.1
> pcib1: <PCI to PCI bridge (vendor=8086 device=2543)> at device 2.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib2: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci1
> pci2: <PCI bus> on pcib2
> pci1: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib3: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci1
> pci3: <PCI bus> on pcib3
> pcib4: <PCI to PCI bridge (vendor=8086 device=2545)> at device 3.0 on pci0
> pci4: <PCI bus> on pcib4
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 28.0
> pcib5: <PCI to PCI bridge (vendor=8086 device=1460)> at device 29.0 on pci4
> IOAPIC #4 intpin 0 -> irq 16
> pci5: <PCI bus> on pcib5
> aac0: <Adaptec SCSI RAID 2120S> mem 0xf0000000-0xf7ffffff irq 16 at device 
> 1.0 on pci5
> aac0: Unknown processor 100MHz, 112MB cache memory, optional battery not 
> installed
> aac0: Kernel 4.1-0, Build 7244, S/N bb88f3
> aac0: Supported 
> Options=11d7e<CLUSTERS,WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,SGMAP64,ALARM,NONDASD>
> pci4: <unknown card> (vendor=0x8086, dev=0x1461) at 30.0
> pcib6: <PCI to PCI bridge (vendor=8086 device=1460)> at device 31.0 on pci4
> IOAPIC #3 intpin 4 -> irq 17
> IOAPIC #3 intpin 5 -> irq 18
> pci6: <PCI bus> on pcib6
> ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3000-0x30ff mem 
> 0xe8300000-0xe8300fff irq 17 at device 2.0 on pci6
> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
> ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0x3400-0x34ff mem 
> 0xe8301000-0xe8301fff irq 18 at device 2.1 on pci6
> aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
> uhci0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> port 0x2000-0x201f 
> irq 2 at device 29.0 on pci0
> usb0: <Intel 82801CA/CAM (ICH3) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> port 0x2020-0x203f 
> irq 10 at device 29.1 on pci0
> usb1: <Intel 82801CA/CAM (ICH3) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> port 0x2040-0x205f 
> irq 11 at device 29.2 on pci0
> usb2: <Intel 82801CA/CAM (ICH3) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> pcib7: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0
> IOAPIC #0 intpin 17 -> irq 19
> pci7: <PCI bus> on pcib7
> pci7: <ATI Mach64-GR graphics accelerator> at 1.0 irq 2
> fxp0: <Intel 82550 Pro/100 Ethernet> port 0x4400-0x443f mem 
> 0xe8420000-0xe843ffff,0xe8401000-0xe8401fff irq 19 at device 2.0 on pci7
> fxp0: Ethernet address 00:30:48:22:e6:ab
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1: <Intel 82550 Pro/100 Ethernet> port 0x4440-0x447f mem 
> 0xe8440000-0xe845ffff,0xe8402000-0xe8402fff irq 11 at device 3.0 on pci7
> fxp1: Ethernet address 00:30:48:22:e6:ac
> inphy1: <i82555 10/100 media interface> on miibus1
> inphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> isab0: <PCI to ISA bridge (vendor=8086 device=2480)> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH3 ATA100 controller> port 
> 0x2060-0x206f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 mem 
> 0xe8000000-0xe80003ff irq 0 at device 31.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <unknown card> (vendor=0x8086, dev=0x2483) at 31.3 irq 0
> orm0: <Option ROMs> at iomem 
> 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xcd7ff,0xdc000-0xdffff,0xe0000-0xe3fff 
> on isa0
> pmtimer0 on isa0
> fdc0: ready for input in output
> fdc0: cmd 3 failed at out byte 1 of 3
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> ppc0: parallel port not found.
> APIC_IO: Testing 8254 interrupt delivery
> APIC_IO: routing 8254 via IOAPIC #0 intpin 2
> SMP: AP CPU #2 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #3 Launched!
> acd0: CDROM <MATSHITA CR-177> at ata1-master PIO4
> Waiting 15 seconds for SCSI devices to settle
> aacd0: <Volume> on aac0
> aacd0: 34970MB (71619584 sectors)
> aacd1: <RAID 5> on aac0
> aacd1: 139948MB (286614016 sectors)
> Mounting root from ufs:/dev/aacd0s1a 
>
 
혹시.. soft-updates 가 켜져 있나요..? @.@;;
그냥.. 느낌에.. ㅡ.ㅡ;;;
_______________________________________________
한국 FreeBSD 사용자 그룹(KFUG) questions 메일링 리스트
questions at kr.FreeBSD.org
http://www.kr.FreeBSD.org/mailman/listinfo/questions
[ 날짜순 색인 ] [ 댓글순 색인 ] [ 최상위 색인] [ 검색]
Copyright © 1998-2005 Korea FreeBSD Users Group.
All rights reserved. webmaster at kr.FreeBSD.org
$Date: 2004/12/08 16:47:29 $ 		Powered by FreeBSD